| Certifications
| INFINITYKA INFINITY All in One Sealant & Adhesive  KA INFINITY SEALANT is the ultimate performing fast curing, high strength grab adhesive & sealant. KA INFINITY SEALANT can be used for general purpose construction, modular building applications and vehicular bonding of Stone, Concreate, Wood, Brick, Glass, Mirrors, Stainless Steel, Zinc, Aluminium, Gypsum Board & most Plastics. KA INFINITY SEALANT does not shrink and is resistant to UV radiation, chlorine, mould and general weathering. Adhesion to almost all surfaces internally and externally without primer is excellent and will even bond in the wet to damp surfaces. » Free of Solvent, Silicone & Isocyanates » Low odour and free of Volatile Organic Compounds » Bonds in the wet » Paintable DIRECTIONS FOR USE Surfaces to be sealed must be clean, and free from dust, dirt, frost, grease and other contamination. Cut the cartridge tip and applicator nozzle to the required diameter. Screw nozzle onto cartridge. When using as an adhesive: Apply product in small blobs or a continuous wavy bead along the surface to be bonded, offer up firm into position before skin forms. When using as a sealant: To achieve a clean finish, apply masking tape to adjacent areas where potential exuded adhesive is not wanted. Apply sealant with applicator gun ensuring good surface contact is achieved. Wash hands after use. STORAGE In a cool dry environment, product can be stored for 12 months from its production date in original unopened container, at temperatures between +2°C and + 25°C. HEALTH & SAFETY Use only in well – ventilated areas and avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Wear suitable protective clothing and gloves. Keep out of reach of children.  Technical Data Material Safety Data Sheets |
